AEON SCFG 8000 Food grade lubricant (20L)
Product code: ZS1216945
AEON SCFG 8000 is a synthetic oil specially designed for the food industry, it meets all necessary safety and hygiene standards, ensuring clean and efficient food production. It has high demulsification and anti-corrosion properties, with an effective life cycle of 8000 hours.
General characteristics
Kinematic viscosity at 40°C: 48.5 mm2/s
Kinematic viscosity at 100°C: 7.7 mm2/s
Flash point: 264°C
Viscosity: ISO class 46, 68
Freezing point: -49°C
Operating time: 8000 hours
Capacity: 20 litres
Also available Gardner Denver (Germany) tanks: 5 and 208 litres.
AEON SCFG 8000 for the food industry - 8000 hours*.
AEON SCFG 8000 is a PAO (polyalphaolefin) based blend approved by the USDA as a Class H-1 lubricant for use in the food industry. It meets the requirements of FDA 21 CFR178.3570 - Lubricants for incidental food contact.
AEON SCFG 8000 is a long life lubricant formulated to reduce maintenance and extend compressor life.
Advantages:
- Tested and certified by NSF International. Registered in the H-1 category of oils approved for use in the food industry.
- Complies with the strict requirements of ISO 21469 and FDA 21CFR 178.3570 - lubricants for which accidental contact with food is permitted
- Has improved lubricating properties at both high and low temperatures
- Low pour point -49°C
- Provides high performance characteristics
- It is one of the mandatory components that provide a 10-year PROTECT 10 warranty
- Extended service life of synthetic grease - 8000 hours of operation*
- Extends equipment life and minimises maintenance and downtime
- Suitable for all oil screw compressors used in the food industry.
Laboratory Oil Sample Analysis
When you become an AEON oil user, you have access to Gardner Denver's sample testing facilities. By simply taking a sample from your air compressor and sending it to the lab, you will receive a simple and easy to understand report on important oil parameters such as: water content, viscosity, acid number and the presence of any metals in your oil. Receiving these reports and implementing recommendations for improvement can ensure that your air compressor achieves its maximum potential efficiency and service life.
*Oil drain intervals are given assuming that:
1) Air cleanliness in the work area is maintained.
2) Compressor filters and separators are replaced in accordance with the operation and maintenance manual.
3) Normal temperature conditions of the compressor
Article: Increase your efficiency with AEON oils from Gardner
Denver
Characteristics of AEON SCFG 8000
Characteristics | Data |
Kinematic viscosity at 40°C | 48,5 mm²/sec |
Kinematic viscosity at 100°C | 7,7 mm²/sec |
Flash point | 264°С |
Viscosity, class ISO | 46, 68 |
Freezing point: | -49°С |
